|
 |
Hard drive profile
 |
|||||||
| Date added: | 2011-08-24 | Posted by: | JonnyEnglish | ||||
| Brand: | Western Digital | Firmware: | N/A | ||||
| Model number: | WD20EARS | Manufacture date: | N/A | ||||
| Model name / serie: | WD Caviar Green | Buffersize: | 64 MB | ||||
| Drive size: | 2000 GB | RPM: | N/A | ||||
| XBOX version: | v1.6 | Progam(s): | XBHDM | ||||
 Yes |
|||||||
| Additional notes: | Report this entry - Edit | ||||||
| Works fine but some games like Burnout 3 seem to hang on loading when transferred to the Hard Disk. I didn't find this with other IDE Drives. Maybe I need to change the IDE Cable? | |||||||
Comments
| #1 - posted by Jim (24.144.13*.*) | 2011-08-28 09:13:02 |
| How did you get this to work According to what I've read this is a SATA drive which is NOT compatible with XBOX. http://www.newegg.com/Product/Product.aspx?Item=N82E16822136514 |
|
| #2 - posted by (98.95.19*.*) | 2011-09-04 17:01:42 |
| Jim, you have to use an adapter (most recommend this one on DealExtreme: http://www.dealextreme.com/p/sata-to-ide-hard-disk-mini-vertical-bridge-adapter-card-12537). I've been trying for months to use xboxhdm v1.9 to configure this drive for my v1.6 xbox to no avail. Everything appears to work, but I always get error 13 when installed to the xbox. Could you provide further instructions on how you accomplished this or an email address so we could compare notes? Thanks! |
|
| #3 - posted by (75.155.7*.*) | 2011-10-26 04:30:27 |
| I am on the same issue as justin can you give a little insight | |
| #4 - posted by Rob (108.17.10*.*) | 2012-01-21 16:33:11 |
| When testing, for some reason i had to have my case top on or it would not boot. Took me forever to figure it out. | |
| #5 - posted by (75.184.1*.*) | 2013-03-23 13:46:40 |
| If you are getting Error 13, you probably need a 40-pin, 80-wire IDE cable. If you are getting Error 13, I would assume that your cable only has 40-wires. | |